Connect your touchscreen to a wireless Wi-Fi network or via a network cable.
Ethernet
Connect the network cable to the LAN port of your touchscreen. The touchscreen will automatically detect the network and connect to it as soon as ‘Ethernet’ has been activated in the settings menu.
Follow the steps below to view the specifications of the network:
- Open the Central menu by clicking on the hamburger menu icon in the quick menu.
- Open the sidebar to access the settings menu
- Select the sub-menu ‘Connectivity’
- Select ‘Ethernet’ by activating the toggle
- The network specifications will be displayed
You can easily loop the LAN connection by using the LAN out port of the screen. Please note that the LAN connection can only be looped through when the screen itself is connected with a LAN cable and turned on. When a device is connected to the LAN out port, it will have its own IP and MAC address.
Wi-Fi connection
Follow the steps below to set up a connection to a Wi-Fi network:
- Make sure the Wi-Fi module is installed correctly
- Open the Central menu by clicking on the hamburger menu icon in the quick menu.
- Open the sidebar to access the settings menu
- Select the sub-menu ‘Connectivity’
- Select ’Wi-Fi’. The touchscreen will scan for available networks
- Select the preferred network. Click on ‘Advanced’ if you want to connect with an advanced network
- Voer het wachtwoord voor het netwerk in. Selecteer het oog pictogram als u de tekens van het wachtwoord wilt weergeven.
- Enter the network password. Click on the eye icon to reveal the password.
- Under the advanced button in the connectivity menu you can open the advanced network settings.