1. Prowise - Customer Service
  2. Touchscreens
  3. Prowise Touchscreen Ten

Tilt position lift not visible in Central menu

If the Central menu lacks the option to tilt the screen, you can solve it in the following way:

  1. Turn off the screen and unplug the power cable or flip the 0/1 switch.

  2. Unplug the lift's USB connector from the screen and then plug it back in. This connector is on the bottom left.

  3. Plug the power cable back in or flip the 0/1 switch again.

  4. Start up the screen.

  5. After a few seconds, the tilt option will become visible in the Central menu.