Initialisation of the height movement of the lift
- Place the lift in the lowest position by pressing the down button of the handheld or foot control panel.
- Once in the lowest position, again press the down button and continue to hold the button until the lift has moved automatically a further 3 mm and then withdrawn. This takes no longer than 5 seconds.
- Release the down button only when the lift has come to a complete standstill.
- If the down button is released before the lift has stopped, initialisation will be interrupted and the process must be restarted.
- The columns are now initialised and ready for use
Initialisation at the tilt function
- Place the screen in a horizontal position by pressing and holding down the tilt down button of the manual control panel.
- Once in the lowest position, again press the tilt down button and continue to hold the button until the screen has moved automatically a further 3 mm and then withdrawn. This takes no longer than 5 seconds.
- Release the tilt down button only when the lift has come to a complete standstill.
- If the tilt down button is released before the screen has stopped, initialisation will be interrupted and the process must be restarted.
- The tilt function of the lift is now initialised and ready for use.