When using a PC module, make sure that the module is placed correctly and is locked.
Follow the steps below to install the OPS PC module:
CAUTION! Please ensure the power cable is not connected to the main power supply while installing the OPS PC module.
1. Unscrew the screws
2. Remove the cover plate
3. Put the PC module in place and pay special attention to positioning the PC module correctly.
4. Screw the locking screw in the PC module
5. Screw the WiFi antennas on the PC module
To disconnect the OPS PC module, follow these steps:
1: Turn off the screen and disconnect the power cable.
2: Loosen the locking screws, see step 4 in the image above.
3: By gripping the locking screws, you can slide the PC module out.
(Be careful not to touch the WiFi antennas, as these may be damaged.)