The Prowise EntryLine UHD is equipped with a WiFi module.
Follow the steps below to successfully install the WiFi module (4).
1. HDMI OUT 1.3
2. USB 2.0 update port
3. HDMI IN 2.0 (4K@60Hz)
4. WiFi module
5. HDMI IN 1.4 (4K@30Hz) with CEC and ARC support
6. USB touch for external PC/Mac
7. HDMI IN 1.4 (4K@30Hz)
8. Display Port IN (4K@30Hz)
9. Audio IN for VGA
10. VGA in
11. USB touch for external PC/Mac
12. USB 3.0
1. Unscrew the screws and remove the cover plate.
2. Place the WiFi module in the slot.
3. Tighten the screws and attach the antennas.
Searching WiFi networks
Open the prowise Central menu and go to Settings/Connectivity/WiFi
Select 'WiFi' to enable the Prowise EntryLine UHD to search for available WiFi networks. Connect to a WiFi network as follows:
1. In the Central settings menu, go to 'Connectivity'.
2. Select 'WiFi' and turn on the WiFi switch.
3. Choose your desired network.
Press 'Advanced' to connect to an advanced network.
4. Enter the password to the network, click on the eye icon to reveal the password.
5. Select 'Connect'.
6. You have now established a connection with the chosen WiFi network.