How do I install the OPS Mainboard Module in the Prowise Touchscreen Max?

Need to install or replace an OPS module in your touchscreen? Just follow these clear steps to get it done safely and correctly.

What you’ll need

    •    A compatible Prowise OPS Mainboard module (i3, i5, i5 vPro, or i9 vPro)

    •    A screwdriver (only when installing for the first time)

Installation steps

1. Remove the OPS cover plate on the back of the screen.
2. Gently slide the OPS module into the 120-pin OPS slot until it clicks into place.
3. Tighten the thumbscrews to secure the module.
4. Reconnect the power and turn on the screen.
5. Windows will start automatically from the installed module.

Important: Always use certified Prowise OPS modules to guarantee full 4K/5K support.