Cleaning the screen
Use a soft, dry and lint-free microfibre cloth to clean the screen. Double check whether the cloth is actually clean. If you want to use a cleaning agent, only use one recommended by Prowise. Under no circumstance use aggressive chemical cleaning agents. because they can damage the screen.
- Always apply the cleaning agent to a cloth first. Never apply it directly to the screen of the
All-in-One PC. The cloth can be slightly moist, certainly not wet. This can cause damage to the
All-in-One PC. - Carefully wipe the screen with the lint-free cloth. Do not apply excessive pressure, for this can
damage the screen. For the optimal result, gently wipe the screen using circular motions. Never use an abrasive cleanser.
Cleaning the casing
Use a soft, dry and lint-free microfibre cloth to clean the casing of the All-in-One PC. Make sure this cloth is free of any impurities and that the All-in-One PC is switched off.
- Always apply the cleaning agent to a cloth first. Never apply it directly to the casing of the
All-in-One PC. The cloth can be slightly moist, certainly not wet. This can cause damage to the
All-in-One PC.
| PLEASE NOTE! Always disconnect all cables leading to the All-in-One PC before cleaning, including the power cable. | |
| WARNING! Should the All-in-One PC get wet, do not switch it on or plug the charger in the power outlet. This can cause electric shocks. In case the All-in-One PC is already switched on, turn it off immediately and unplug the charger before drying the All-in-One PC in order to avoid a short circuit. |