My iPro Tilt or Toddler Lift is not working properly. How do I initialise the lift?

Initialisation of the height movement of the lift

  • Place the lift in the lowest position by pressing the down button of the handheld or foot control panel.
  • Once in the lowest position, again press the down button and continue to hold the button until the lift has moved automatically a further 3 mm and then withdrawn. This takes no longer than 5 seconds.
  • Release the down button only when the lift has come to a complete standstill.
  • If the down button is released before the lift has stopped, initialisation will be interrupted and the process must be restarted.
  • The columns are now initialised and ready for use

Initialisation at the tilt function

  • Place the screen in a horizontal position by pressing and holding down the tilt down button of the manual control panel.
  • Once in the lowest position, again press the tilt down button and continue to hold the button until the screen has moved automatically a further 3 mm and then withdrawn. This takes no longer than 5 seconds.
  • Release the tilt down button only when the lift has come to a complete standstill.
  • If the tilt down button is released before the screen has stopped, initialisation will be interrupted and the process must be restarted.
  • The tilt function of the lift is now initialised and ready for use.