With the explanation below you have a step-by-step plan for initializing the lift system.
Initialisation of the height movement of the lift
• Place the lift in the lowest position by pressing the down button of the handheld or foot control panel.
• Once in the lowest position, again press the down button and continue to hold the button until the lift has moved automatically a further 3 mm and then withdrawn. This takes no longer than 5 seconds.
• Release the down button only when the lift has come to a complete standstill.
• If the down button is released before the lift has stopped, initialisation will be interrupted and the process must be restarted.
• The columns are now initialised and ready for use.
Initialisation at the tilt function
• Place the screen in a horizontal position by pressing and holding down the tilt down button of the manual control panel.
• Once in the lowest position, again press the tilt down button and continue to hold the button until the
screen has moved automatically a further 3 mm and then withdrawn. This takes no longer than 5 seconds.
• Release the tilt down button only when the lift has come to a complete standstill.
• If the tilt down button is released before the screen has stopped, initialisation will be interrupted and the process must be restarted.
• The tilt function of the lift is now initialised and ready for use.