As of Central 5, it is possible to adjust EDID settings in the Distributor Menu.
If the touchscreen has flickering display issues (PC or HDMI input), setting the EDID to 1.4 may help.
You can often resolve this by changing a setting in the Distributor Menu. You access this menu by pressing the following buttons in succession on the remote control:
Central (top right button) => Left => Right = Up => Down => Central.
Select 'HDMI Setting' here.
Under 'HDMI - EDID Version', you can adjust the EDID.
You can choose from the following options:
EDID 2.0 [Standard]
- Automatic resolution
- Maximum resolution 3840x2160P @ 60Hz RGB 4:4:4
- High bandwidth @ 18 Gb/s
EDID YUV4:2:0 @ 60Hz
- Forced resolution
- 3840x2160P @ 60Hz YUV 4:2:0
- Average bandwidth @ 9 Gb/s
EDID 3840x2160P @ 30Hz RGB 4:4:4
- Forced resolution
- Average bandwidth @ 9 Gb/s
EDID 1.4
- Automatic resolution
- Maximum resolution 1920x1080P @ 60Hz RGB 4:4:4
- Low bandwidth @ 4.5 Gb/s
EDID 1920x1080P@50Hz RGB 4:4:4
- Forced resolution
- Low bandwidth @ 4.5 Gb/s